News

FTEC1 Fully Assembled SCAR Barrels are available now! The FTEC1 SCAR Barrel Muzzle Device massively improves the accuracy of your FTEC1 blaster with minimal impact on muzzle velocity. The SCAR barrel has six strings that act as rifling and centers the dart in the barrel. It also features a built in air stripper that redirects excess air away from the dart and reduces muzzle blast. The SCAR barrel is housed in a protective SCAR shroud so you don't have to worry about accidentally damaging the strings during gameplay

Fully assembled custom FTEC1 blasters are now available! If you don't have a 3D printer or just want to have an FTEC1 blaster built to the highest standard, then we've got you covered. Each FTEC1 blaster takes over 110 hours to print and is carefully assembled and tuned to ensure peak performance.    The FTEC1 is a pump action spring powered blaster designed to deliver big performance in a small package. This Slam-fire capable blaster is just under 17" inches long and can be configured to hit anywhere from 150 to over 230 FPS. The mag through grip design is compatible...

The hardware kit and digital files for the FTEC1 SCAR Barrel are out now! If you have your own 3D printer, you'll be able to build your own. The FTEC1 SCAR Barrel Muzzle Device massively improves the accuracy of your FTEC1 blaster with minimal impact on muzzle velocity. The SCAR barrel has six strings that act as rifling and centers the dart in the barrel. It also features a built in air stripper that redirects excess air away from the dart and reduces muzzle blast. The SCAR barrel is housed in a protective SCAR shroud so you don't have to...

The Hardware kit and digital file set for our original FTEC1 blaster is out now! You'll be able to build your own FTEC1 blaster if you have your own 3D printer. The FTEC1 is a pump action spring powered blaster designed to deliver big performance in a small package. This Slam-fire capable blaster is just under 17" inches long and can be configured to hit anywhere from 150 to over 230 FPS. The mag through grip design is compatible with 15rd Talon Magazines and 18rd Curved Talon Magazines. This blaster has been designed to be Rock solid with zero creaky parts. ...

The Foam Technician 8 Round Speed Loader for the Nerf Rival TakeDown Blaster is out now! This Speed Loader allows you to quickly reload all 8 rounds into your blaster with a single stroke. This speed loader is built incredibly solid with tight tolerances for smooth operation. The speed loader clips for the Rival TakeDown are attached onto the Rival rails of the blaster and allow one or two TakeDown Speed Loader to be mounted onto the side of the blaster. These clips keep your speed loader securely attached until you need it and they allow you to conveniently top...